Samsung Galaxy S Advance Flash Done With Odin How To Flash Root

Samsung galaxy s advance flash done with odin

Update Galaxy S Advance I9070 to Official Jelly Bean 4.1.2

 

As you know, the Austrian, Belgium, France, Germany, Hungary, Italian, Spain and UK users of the Samsung Galaxy S Advance I9070 have received the official OTA Android 4.1.2 Jelly Bean update, dubbed as XXLQ4. Anyway, because we are talking about an OTA release, the XXLQ4 firmware will not be made available for all the devices at the same time. So, if you haven’t received the ROM yet, or if you have a rooted Galaxy S Advance and can’t apply the OTA Jelly Bean 4.1.2 OS, you might want to manually flash the update on your smartphone.
Because of that I have brought you the present step by step guide, which will take you through the manual installation of the Android 4.1.2 XXLQ4 firmware. Of course the tutorial is being suitable only with the Samsung Galaxy S Advance model number I9070, so don’t perform the same for similar handsets. Furthermore, the best part related to this procedure is that it can be used for the S Advance users that are from other countries than the ones mentioned above. Therefore, you have nothing to worry about, the tutorial being perfect for those who need to manually install the stock Jelly Bean XXLQ4 ROM.

ecause of that I have brought you the present step by step guide, which will take you through the manual installation of the Android 4.1.2 XXLQ4 firmware. Of course the tutorial is being suitable only with the Samsung Galaxy S Advance model number I9070, so don’t perform the same for similar handsets. Furthermore, the best part related to this procedure is that it can be used for the S Advance users that are from other countries than the ones mentioned above. Therefore, you have nothing to worry about, the tutorial being perfect for those who need to manually install the stock Jelly Bean XXLQ4 ROM.

1. On the computer first of all, download Samsung KIES and install the proper drivers for your phone.
2. Then, download and install Odin.
3. Use the link from here and download the update file; then extract the same on your computer.
4. On the PC open Odin.
5. Turn off the device and reboot into download mode.
6. The Galaxy S Advance can be entered into download mode by pressing and holding the Volume Down, OK and Power buttons at the same time.
7. Now, use the USB cable and connect the handset with the computer.
8. Once you do that, on Odin the “added” message must be displayed and the ID:COM section should be yellow or blue.
9. If different, re-install the drivers and repeat the above mentioned steps.
10. If everything is working perfect, from Odin select PDA and pick the update file.
11. Click on “start” and begin the flashing operation.
12. In the end, on Odin the “pass” message will be displayed meaning that you can unplug the USB cable and reboot your phone.

Now, in case you notice that the first boot is taking longer than you was used too, don’t panic, there is nothing wrong with your device. It is a normal fact, but if you do get a loop boot, then here is what you need to do:

• Turn off the device (force restart) or just reboot into recovery mode.
• You can enter the recovery mode by pressing on Volume Up, OK and Power buttons together.
• From the recovery mode wipe the system.
• For the wipe select “wipe data factory reset” and “wipe cache partition”.
• Select “+++go back+++” and “reboot system now”.
• Done.

Now, your Samsung Galaxy S Advance has been successfully updated with the official and stock Android 4.1.2 Jelly Bean XXLQ4 OS. Tell us how things worked while using Odin for applying the ROM and do share the possible issues or problems by using the comments area from below. Also, check our latest guides for learning how to root the Galaxy S Advance on XXLQ4 firmware. That’s all for now, but stay close for further guides, tricks, tips and Android related news.